Console ICX7250 - Access Denied
Hi, On a ICX7250 switch, using SecureCRT/Putty , and a micro usb - serial cable, I have a "acces denied" displayed on my session ? Is it possible to unlock this console port?
Forum Posts
Resolved! TCP exceeds 100 burst packets
Hi thereI've stumbled across following log entry on one of our ICX7450-24 (running 08.0.90mcT213):N:TCP: Local TCP exceeds 100 burst packets, stopping for 10 seconds!!This is a single event that just popped up. My research wasn't really successful. D...
Resolved! ICX7150-C12P Won’t Boot – ZQ Calibration Error & Shmoo Failure
I have an ICX7150-C12P that isn’t booting properly. When I connect to it via the serial console, I get errors like:"ZQ calibration error (P offset) - Manual IO programming required for correct operation""Validate Shmoo parameters stored in flash .......
ICX7450-48 not forwarding packets
Hello, I have ICX7450-48 switch that does not seem to forward packets correctly. I'm new to this hardware and not sure if this is a misconfiguration on my side or a hardware fault.The switch is running the following firmware version and was reset to ...
SFP Cisco compatibility with Ruckus
i need to check if i can use Cisco SFP with Ruckus Switch ICX7150-48PF?
Related Self-Help
