Hello,I am getting ready to perform a factory reset on my ICX 7150-CP. I have backed up the config files via the USB quick process (holding status button for 10 seconds). I have verified the files were copied to the USB. The files that did not tra...
Hi Techies Is it possible to configure the ac power on the switch icx 7750-48?The Goal is to configure the right or the left AC Power as master and reconfigure if needed. Best Tool to configure would be putty over ssh - could find anything in the doc...
Hello,I need to uplink a Ruckus to a Dell 2048 but the 2 switches uses different commands and I'm at a loss.First, I would like to simply have a trunk ports on both up have a "one cable" uplink.Second, I would like to know how to mirror a port-channe...
Hi Ruckus Team.Our customers have been using ICX 7150 and 7450 as L2 POE with ver. 09.0.10e since early 2023.However, when the power is disconnected and reconnected or the switch is rebooted, the switch is stuck in boot mode or OS> prompt, and the sw...
Hello, my ICX 7150 is stuck in Recovery Mode, and I am trying to update the images via TFTP. I followed the post below, and I was able to ping the host. However, I was stuck in the final step when updating the image. How to perform a Software recover...
