RUCKUS ICX Switch Family

Ruckus Wireless

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

ICX7150 both flash partitions corrupted — need SPR08080f.bin for boot monitor recovery

My Ruckus ICX7150 is stuck in a boot loop with both primary and secondary flash partitions corrupted. I am at the boot monitor prompt (ICX7150-Boot>). Boot monitor version is 10.1.15T225 which cannot accept UFI images — I need the intermediate non-UF...

ICX8000 SCP Backup Creates 0-Byte Files on QNAP Server

Hello Ruckus Support Team,I am experiencing an issue when attempting to back up the running-configuration from ICX8200 switches to a QNAP server using SCP.copy running-config scp 10.x.x.x /QNAP/S1-Core-MDF.cfg The switch initiates the transfer, but t...

Resolved! Point-to-Point between 2 locations

We installed a point-to-point connection between our data center and one of our branch locations. One connection is 10g and goes straight into an ICX750 with a1310nm SFP connector and port configured for 10g-full. The other end goes into a Ciena 10g ...

How to use the packet-capture command

Hi everyone,I'm trying to use the packet-capture remote command on an ICX 7550 switch, but every time I enable it, I receive the following message: Please configure remote IP address before enabling remote packet captureI've searched through the CLI...

What do the different MAC Event Actions mean?

I'm trying to find documentation on what each of the MAC Event actions mean in the logs and I can't find it. Here is an example log entry:May 15 07:45:27 MA_MDF MAC-Event: MAC:aaaa.aaaa.aaaa-VLAN:511-PORT:2/1/48-ACT:1::I'm guessing Action 1 is MAC re...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1