Configure Ports of ICX8200 in SmartZone v-SZe

[peter_riederer_]

Hey Folks,

is there special trick configuring Ethernet Ports in SmartZone v-SZe Controller?
When i select a Port and click "Configure" we always get this error: 

What I am missing?

Regards

Peter

[Chandini]

Hi  Peter_riederer_

Thank you for reaching us. 

• The port speed you are trying to change speed on is it a single port or is it in Lag ? 
• Could you please help with output of "show int e <port number>" output from the switch ?

Thanks 

[peter_riederer_]

Hello Chandini,

the Switch is just fresh out of the box. There is no configuration on any port so far.
IP via DHCP, SmartZone Management enabled and Firmware-Update to the latest Version.

i thought i will be able to configure the vlans to the port bei clicking "Configure"

Regards

Peter

[Chandini]

Hi  Peter_riederer_

Ack and Thanks for reverting. 

Correct you should be able to view port settings when you click "Configure" options. 

Link reference:

• https://docs.commscope.com/bundle/sz-522-adminguide-sz100vsz/page/GUID-85139C4E-C548-4B1B-931F-B77C6...

Could you help me with below information:

• Could you please let me know if you are able to take CLI access of the switch from SmartZone ? 
• Which SmartZone version are you running ?
• I see that switch is 8200 and is it on 10.0.10a ? 

Thanks 

[peter_riederer_]

we are using v-SZe with:
Controller Version 6.1.1.0.959
Control Plane Software Version 6.1.1.0.446
AP Firmware Version 6.1.1.0.1274
Switch Firmware: RDR10010a_cd3

Cli is working without any issues from v-SZe