cancel
Showing results for 
Search instead for 
Did you mean: 

Regarding SCI Install issue. "We're sorry, but something

kim_seonmyeong
New Contributor II

When I open the webpage after installing SCI in VMWARE ESXI, this message appears and DEMO cannot be installed.
"We're sorry, but something went wrong"

1 ACCEPTED SOLUTION

syamantakomer
Community Admin
Community Admin

Hi Kim,

This could happen for various reasons.

One of the known reasons is that this happens because DHCP provides both IPv4 & IPv6 information and SCI is not able to resolve IPv6 information.

As mentioned in the install guide, SCI does not support IPv6. If that doesn't fix the problem, please SSH into SCI VM and copy out logs from cluster manager using the below command and send allout.txt to Support.

sudo docker logs rsa-cluster-manager-setup > allout.txt 2>&1


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

View solution in original post

2 REPLIES 2

syamantakomer
Community Admin
Community Admin

Hi Kim,

This could happen for various reasons.

One of the known reasons is that this happens because DHCP provides both IPv4 & IPv6 information and SCI is not able to resolve IPv6 information.

As mentioned in the install guide, SCI does not support IPv6. If that doesn't fix the problem, please SSH into SCI VM and copy out logs from cluster manager using the below command and send allout.txt to Support.

sudo docker logs rsa-cluster-manager-setup > allout.txt 2>&1


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

Thank you for your support