cancel
Showing results for 
Search instead for 
Did you mean: 

is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?

pasan_jayarathn
New Contributor
is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?
5 REPLIES 5

anoshan_elalasi
New Contributor
Yes...you can configure
Try "set snmp" and press "tab" and find tge available option

stephen_hall_60
Contributor
not sure why, but this does not show you how to ENABLE snmp (only set the options) , tried set snmp enable   or enabled    give output below (ie cmd not found):

Usage: set snmp {options}
                 ->version ,             SNMP version(v2c,v3,both)
                 ->system contact ,      SNMP V2c system contact
                 ->system location ,     SNMP V2c system location
                 ->community ro ,         read-only community name
                 ->community rw ,         read-write community name
                 ->trap {enable|disable},       SNMP V2c trap enable flag
                 ->trap-svr ,           SNMP V2c trap server ipaddr



rkscli: get snmp
SNMP   enable             : disable
SNMP   version            : v2c and v3
SNMPv2 ro community       : public
SNMPv2 rw community       : private
SNMPv2 sys contact        : https://support.ruckuswireless.com/contact_us
SNMPv2 sys location       : 'xxxx'
SNMPv2 trap enable        : enable
SNMPv2 trap server        :
SNMPv2 trap/inform


rkscli: set snmp enable Sorry, no match to set snmp enable found

rkscli: set snmp up    
Usage: set snmp {options}
                 ->version


You want "set remote-mgmt snmp"

ankit_singh_5sr
New Contributor II
any body have a knowledge of snmp v3 on rukus ap please upload