HI i am facing bandwidth drop issue in my network with 802.1x enable SSID only. Device in my Network: 1- Zone Director 2- Access Point R5003- Cisco Switch 29604- Cisco ACS for RadiusProblem: i have observed that when wireless client disconnect from t...
Hello guys,I have several Ruckus ZoneFlex R510 APs. I want to know mW equivalent, if I will set TX power settings to -8dB in ZD for both bands. Thanks in advance
Need to power multiple T710 to use in mesh mode.
Don’t have 4-pin AC adapter, but do have correct PoE injector. Can I use injector without data input to power T710 and use in mesh mode?
Currently have a networking setup with a ZD 1106 (9.7.1.0) with about 11 ZoneFlex 7372 AP's (licensed for 25). We are looking to slightly increase the range of the network, so looking at getting a new AP and these are now end of life. So, which AP's ...
