I have Ruckus unleashed setup at home
Currently i use 802.11 authorisation and use WPA2/WPA3 encryption
Unfortunately, all my wireless clients connects with WPA2 encryption
I can use WPA3, but with open autorisation.
When i try to switch wpa3+8...
i use only 2 AP in my home in Unleashed mode with last firmware - R710 and H510.
Both wired to Netgear OClick power switch.
r710 pared with short 1m cable. h510 cable is in wall ~5-10 meters.
Once a week i have random reboot. My question is - ho...
I have ruckus unleashed setup (r710+h510) in my home. They have wired connection - no meshI try to upgrade to 200.9 firmware, but on h510 it cant download image with following error:ruckus Fail: firmware download fail!
On r710 everething fine.
I have ruckus unleashed deployment in country house. i have fiber internet and cable to my garage.on street wall there is Ruckus T310d.and in main house (15 meters) + 1meter brick wall - 2 ruckus r710 for clients.Internet channel currently 100mbit, b...
I upgrade my unleashed network to newest Ruckus Unleashed 184.108.40.206.278 firmwarenetworks works and upgrade was successfulunfortunately i cant open unleashed dashboard after upgrade. unleashed app works, but with delays. I cant see for example mesh ...
Yes. all done
all client devices works fine with WPA3, but question about 802.1x + WPA3.
In Ruckus Unleashed web-interface i can't select 802.1x+WPA3+Local database. Only external Radius server
But pure WPA3 with no autorization or ...
i changed address from DHCP to manual to main AP - and now 5 day everything looks good.
will see, but in other location i have same issue - random unleashed network rebooting with DHCP IP options in several AP.
All access point has wired connection a...
Does second r710 also has unleashed firmware?
if yes - just reset it with button. May be it previously was installed in other network
If everything connect- it will recognised in dashboard in 3-5 minutes