HiWe have a ZD 3000 controller on premise, since our branches have expanded we want to add access points in the branches and manage from a central location.Can someone advice if this scenario would work, if so what must be the workaround ?Thank you
Hi , have integrated AD with ZD 1200 with Portal Redirection, the users are getting the authentication page every day, is there a way to enable one time authentication based on AD
Recent Access points will not be supported on version ZD 1106 (9.7.1.0), With ZD 1106 announced end of Life the last firmware update is 9.10.2 , The R310. R510 & R610 will need Zone Director version 9.13.0.0.232, which requires at least a ZD1200. In...
Yes , the AP joins automatically to the controller.... this was a working scenario in one of my deployments, i used a ZF 7025 in my case, infact all the ports on the Access point can be on different vlans and can get dhcp.. I used a internet gateway ...
I use to use the below config.... where VLan 2 will be the WLAN VLAN and VLan 10 will be the mgmt VLAN and 113 will be the VLAN for the Wired port from the APinterface GigabitEthernet1/0/2 description Room No 133 port link-type trunk port trunk permi...
