CommScope RUCKUS Community Forums

ryanhayes · 06-10-2020

For some reason, my Samsung Galaxy Note 10+ is continually directed towards the 2.4ghz band of my network. It doesn't matter if I'm standing directly under one of my AP's. It's maddening. I'm running the latest (just released) version of Unleashed on...

ryanhayes · 09-18-2019

I have a newly installed Unleashed R510 system with 2 AP's wired together. It came with my new Smart Home. I have several issues:Several of my clients are continually connecting to the AP that is the farthest away. It is especially bad with my Apple ...

ryanhayes · 02-15-2021

Maybe I'm stating the obvious but the power surges need to be addressed before you can tell if you have any Ruckus issues. I'm also in a Lennar home. The AP's take 7-10 mins to reboot and come online after a power outage or reboot. You did say surge ...

ryanhayes · 11-01-2020

You can do it from the Ruckus app or by logging into them at unleashed.ruckuswireless.com if you're running unleashed. Not sure if not.

ryanhayes · 11-01-2020

Easy one here. The AP's don't assign and it's permanent. They will switch back and forth between bands based on the best signal and performance. If you want a device on a dedicated 5ghz band you'll need to setup a separate 5ghz only network with a di...

ryanhayes · 06-10-2020

Nope. I have a fairly small home running 2 R510's. I'm close to just disconnecting my AP's and going back to my ISP's router. Much better performance.

ryanhayes · 06-10-2020

I have this enabled and it pushes more devices to the 2.4ghz network.

CommScope RUCKUS Community Forums

User Statistics

User Activity

Android Phone on 2.4ghz Band 99% of the Time

R510 - Force Client to Connect to Master AP

Re: Lennar Home - Wifi issues

Re: How to Choose The Speed One Connects With

Re: How to Choose The Speed One Connects With

Re: Adaptive Band Balancing Appears Awesome

Re: Adaptive Band Balancing Appears Awesome