mohamed_el_harr
New Contributor II
since ‎03-27-2015
‎02-17-2022

User Statistics

  • 13 Posts
  • 0 Solutions
  • 10 Kudos given
  • 8 Kudos received

User Activity

Hi, I'm planning to stack two CS ICX 7550 for redundancy links to Access switches , my question is, it will be necessary to have duplicate DAC cable for redundancy or just one cable  is enough ?
Hi all,Ruckus says about root-guard that: "Root guard must be configured on the perimeter of thenetwork rather than the core."But as far as  I know the root guard should be configured on the core switch (most of the time the core switch is root Switc...
Can anyone explain what is the difference between stp-protect and bpdu-guard?as far as I know stp-protect can be enabled on the end station port to prevent port from initiate or participate on STP topology, also bpdu-guard can be configured on the en...
Hi ,I have a Rukcus AP R500 configured as unleashed and connected to my Internet Router, the issue is that I notice that each time there is no Internet and I reboot the router , the AP rebooted itself too.any idea why?
Hi , I'm configuring the multicast on Rukcus Switch for the first time, I used to do that in HP switches.I used to activate fastleave on Access Switches on HP as bellow :vlan 8   no ip igmp fastleave 26,28   ip igmp forcedfastleave 1-25   exit- How c...