VRoIT Firmware is not available from the support site, tried to search if there is announcement on portal for its disappearance but didn't find any. I am in middle of deployment and not able to find it on the support site. Are there any plans to stop...
I tried to enable POE on ICX 7450-24P, but it doesn't show any output.Core#show po poe inline power information port Show port security power-savings-statistics Power savings statisticsCore#show p...
Dear @bdillard ,Best source, is to do a packet capture on wired or wireless interface and you should be able to find the source of DDOS attack.Regards,Abilash
Hi @WiFi_GURU ,ICX comes with 90 days remote support from the date of shipment, after which the unit should have a support associated with it else you would not be able to get support from Ruckus TAC. The Partner/Disti should always quote ICX with su...
Hi @jesperj ,Please use below link to find the devices that are supported on Ruckus One.https://www.ruckusnetworks.com/ruckus-one-supported-network-devicesRegards,Abilash PR
Hi @lienmonden ,There are two ways of deploying this, Lets assume you have Site A and Site B.Type 1.Run Site to Site VPN between the two Sites and NAT internal IP of SZ's and AP's so that their subnets are reachable across the Sites, Firewall Rules h...
Hi @lienmonden ,You would get the internal IP displayed in the output of "get scg" command, if you don't want that to be seen, the other way is configuring the NAT on the firewall instead vSZ, provided you allow all the ports that needs to be open fo...
