So two things...1. Is it expected behavior that you must log into the vSZ with the local admin account only to be able to use the CLI Session for ICX switches? Is that something that will change in a future release to work w/AAA logins? 2. Is it ...
Hmm. That's a rather new version itself. Might be worth going back through the release notes to see if this was called out as an issue and fixed. If I can find time, I'll see if I can replicate your issue on your code ver too.
What version of code is on the switch? When I do the same w/08.0.95cT211, the output shows as expected.
HTTP server status: Enabled
Are you looking for this to output in a single line per port? If now, why would something like show int | I down not work? Outputs lines with the word Down in it. So if the port is up, you wouldn't see the interface or the uptime. But you would s...
What version of code is on the AP. I think within the vSZ at least, it needs to run at least 5.2.1. It is definitely an option with 5.2.2 vSZ code on the AP.
rkscli: get version
Ruckus R750 Multimedia Hotzone Wireless AP
Version: 188.8.131.52.1016 ...
You might have better luck if you put the 10x.x code on it. The 200.x is the Unleashed code and it may simply not even be trying to join Ruckus Cloud.
Once it's in the cloud, it'll be running a 5.x version.