Is the Ruckus Bonjour Gateway implemented on APs only applicable to VLANs actively used by other WLANs configured on the AP?I'm trying to understand if an AP connected to a trunk port setup with a Bonjour Gateway policy, can act as a bonjour gateway ...
We just upgraded from 6.1 to 6.1.1 last night and this button seems to be missing from the AP -> Health airtime graph. The pie chart it opened up was really useful for determining if an AP was having high CCA/Utilization just from itself being busy ...
I'm looking through the documentation below trying to figure out if once we configure TACACS+, will the local accounts still be usable?https://docs.commscope.com/bundle/sz-611-adminguide-sz100vsz/page/GUID-B9789B57-C58B-4215-A83A-AC05BA1458C4.htmlFor...
Hey Gang,I'm working on a new LAN design scheme for our offices and taking my time to fully understand the Bonjour Gateway feature by reading through the "Ruckus Bonjour Gateway “How To” Guide" from 2018. We're running a pair of SZ124s and planning ...
We're looking at redeploying our SCI onto new hardware and I was wondering if its possible to deploy it as 2 master nodes for GUI redundancy or if it's just Master + one or multiple Data Nodes only?
Hi @zoneMedicOrches , I came here looking for answers to the same question. It seems odd that they would pull back in hardware specs from the R760 to the R770, I wonder if 4x4 on 6GHz is being moved to the R8xx series. Did you find a more thorough ...
Hi Bruno,Is it at all possible ruckus might backport the R770 support to SZ v6.1.2? We have a fairly large deployment and would like to start adding some R770s but the SZ v7.0 requirement is a showstopper for us until it goes stable.
Maybe try using the Discovery tool from http://www.tildesoft.com for Mac or Bonjour Browser (http://hobbyistsoftware.com/bonjourbrowser) for windows to make sure you've got the right mdns service defined in your bonjour gateway policy
