Hi everyone,I really have two questions.1) What is the storage size on the ZD3000 and how can I check how much available do I still have? We'll start adding floor plans and this is something that is of concern.2) The event log limit on it is 2500. Ca...
Is there any way to use a DNS entry instead of an IP when provisioning the AP against the controller?Currently this is the way : set scg ip xxx.xxx.xxx.xxxis there anything, or will there be a feature that will allow me to runset scg url vsz.domain.c...
Hi all,Is there anywhere in the SZ / ZD where I can see when and what has been changed?Example : Someone changed / created an SSID, however I'm failing to see when and who did that.
I'm trying to find out if someone is using these model of the ZD with the newer 10.1 code and how their migration went and if the performance is affected.We have about 400 APs on a ZD3000 in HA mode and we are exited to move over to the new code.Here...
and how does that work with max EIRP on difference channels on 5ghz?If the AP decides to change channel to 100 from 36 then the max EIRP will change also and the cell size will change as well.Is that correct?
I'm looking for an answer on this for some time.Will it decrees it from the max radio power output of the model?Or will it decrease it from the max power output based on the regulatory domain?
Thanks for coming back to me Michael.I'm looking at probably adding about 120+ floor plans.On average we'll be looking at 0.3 - 0.4 Mb per image - do you reckon 500-600 Mb are available for this task?
