CommScope RUCKUS Community Forums

jerry_heath_adk · 11-17-2016

I am using a third party software application which provides a way for SNMP polling to return the number of clients associated with each Autonomous Ruckus AP (Zoneflex indoor 7352's and 7372's). On the home screen, all the AP's are listed with the n...

jerry_heath_adk · 11-29-2016

Protected ports on the switches maybe?

jerry_heath_adk · 11-24-2016

Make sure your PC's IPv4 address is in the same subnet as the AP, something like 192.168.0.20. Try using Chrome to do the configuration, not IE or Firefox. Turn off the wifi if your PC has it. Connect your PC directly to the AP with an ethernet ca...

jerry_heath_adk · 11-21-2016

So I did an snmp walk today on my stubborn Ruckus ZF7352. The walk returned a long list of OID's (the total at end of list indicated 2878 but, actually, there were only 295 listed). Interestingly, the list started with .1.3.6.1.4.1.25053.1.1.12.1.1...

jerry_heath_adk · 11-18-2016

Todd and Matt,Do you think I should include the first dot as in:.1.3.6.1.4.1.25053.1.1.6.1.1.1.4.1.3.6or leave it out as in:1.3.6.1.4.1.25053.1.1.6.1.1.1.4.1.3.6or does it matter?

jerry_heath_adk · 11-18-2016

Thanks, Todd. I'm going to try out those two programs next week when I go back into the field.Jerry

CommScope RUCKUS Community Forums

User Statistics

User Activity

Need OID for number of clients connected to one AP

Re: Changing IP/Subnet of a SmartZone cluster and APs

Re: How I can configure R310 T300 and T301s for the first time knowing that the ping failed

Re: Need OID for number of clients connected to one AP

Re: Need OID for number of clients connected to one AP

Re: Need OID for number of clients connected to one AP