Thanks for bringing this up. From what I understand, code 328 indicates that latency has exceeded a defined threshold, while code 332 shows it's returned to normal. It would be helpful to clarify whether this latency is measured between the AP and th...
If you replace your current setup with Unleashed APs at each site and configure them all with the same SSID and password, users can connect more easily across locations. However, Unleashed networks at different sites don’t share authentication sessio...
The latency warnings you're seeing code 328 for crossing the threshold and 332 when it drops back—likely indicate issues with communication between the access point (AP) and the device. This latency can stem from several factors, such as interference...
