CommScope RUCKUS Community Forums

Can I configure SZ100 ports as P1 and P2 on 192.168.11.0 for Management and AP control and P3 and P4 on another network like 172.16.0.0 for AP Data

How I will configure  SZ100 port 1 as Trunk port  on 3.0 OS???

My DHCP is on the 172.16.0.0/16 Network and I want the SZ100 controller and Aps on the other network 192.168.11.0/24.what I have to do in the SZ100 configuration which allow SZ100 to connect to DHCP server.Do I need a router?

i am changing the management ip to 192.168.1.1 to another network 192.168.11.1 but got error message something like "ip cannot change static route not defied  " like thatthan I reset the ZS100 and now its default ip is not pinging and status light is...

on initial setup of SZ100:1 port groupIP address 192.168.1.101subnet 255.255.255.0Gateway 192.168.1.1 (DSL Internet Modem)Primary DNS 8.8.8.8Secondary DNS 192.168.1.1 AP connected to port 2 of SZ100:Ip address 192.168.1.50subnet 255.255.255.0Gateway ...