Hey all,
I wanted to take a moment to touch on the minimum code level to onboard an ICX switch to RUCKUS Cloud. In order for an ICX to begin the onboarding process to RUCKUS Cloud, they must be running a minimum code level of 8090d. To confirm your ...
Hey all,
I want to take a look at building a stack from scratch. There are many ways to build, edit and manipulate stack units. Extensive details can be found in your respective stacking guide. In this example, I will be using 8095 software and tha...
Hey all,
Let's take look at creating LAGs (LACP and static). LACP (802.3ad) is the most common link-aggregation method. We also offer static LAGs.
To create an LACP LAG named 'testlag' with an auto-generated id, you would issue the following:
I...
Hey all,
I wanted to take a moment to look at spanning tree. By default, ICX switches run 802.1d spanning tree on a per-vlan basis. Ideally, we want to use a protocol with faster convergence such as rapid spanning tree (802.1w). I will go through ...
Are you trying to block a mac with 'management-access mac XX:XX:XX:XX deny web'? If not, try removing that command. The rest looks okay to me and you should have access on port 80.
Hey @Goalmaster6,Firstly, I would recommend you upgrade this switch to 10010c_cd2. 10.0 flat is the very first code ever for this platform. As for your issue, I see you have an IP address on VE1 and a route. As long as that is pingable, you should be...
Hey @Dmoya I would like look at either the 7150 or 8200 series to replace your ICX6430.https://www.commscope.com/globalassets/digizuite/61729-ds-icx-7150.pdfhttps://www.ruckusnetworks.com/globalassets/digizuite/993200-RUCKUS-ICX-8200-Switch-Data-Shee...
