Description:
Usually, for Lennar RUCKUS devices troubleshooting purposes, there are some instances where we need the IP Addresses of the RUCKUS ICX-7150-C12P Switch and RUCKUS R510 Access Points to access them using a Web browser Graphical User Inter...
Description:
Upgrading the RUCKUS Unleashed R510 Access Points (APs) to a stable version for Lennar Home users to avoid any issues.
Environment:
Product(s): RUCKUS R510 APsSoftware / Firmware Version: 200.15.6.12.304 (For now and subject to change...
Hello RUCKUS Lennar Community,
Greetings of the day!!!
We have recently introduced the RUCKUS Lennar Knowledge Base self-help guides portal section within this Community for Lennar Home users. It includes the most common issues and some technical gui...
Description:
This Lennar Knowledge Base guide will help get the Command Line Interface (CLI) access on the Windows and MAC devices, to troubleshoot the issues related to the RUCKUS ICX-7150-C12P Switch and Access Points.
Environment:
Product(s): RU...
Description:
Complete the factory reset of the RUCKUS Access Points and configure them with a new Wi-Fi network or Service Set Identifier (SSID).
Environment:
Product(s): RUCKUS R510 Access Points.Software / Firmware Version: This could be on any ve...
Hi @KenB2386
There are some issues/bugs in the non-UFI versions and the PoE issue is one of them. That is the reason we assist in upgrading the Switch to a recommended version to get over such issues.
There are no changes required before the upgrade...
Hi @KenB2386
If your Switch is not on an new version those commands will not be executed. It's that simple.
We are technically trained and experienced to assist our users, we always know what's the best practice.
However, please perform upgrade of t...
Hi @KenB2386 Greetings!!!
Thank you for the response and the update.
Please note, that this factory reset Switch command cannot be executed on an old non-UFI version.
We suggest you upgrade your Switch to the recommended UFI version.
Thank you again....
Hi @rohotomase
Thank you for the response and the update.
Great!!! Good to know that the issue is now resolved.
We appreciate your time and patience on this case.
Please do let me know if you have any queries in this regard.
Thank you again for co...
Hi @Mad-Lennar-Cust
Thank you for sharing the requested information.
Based on the troubleshooting done, your ICX-7150-C12P Switch’s Console ports are not responding. Tried different Troubleshooting steps however, the failure persists, and unable to ...
