Hi I have a zf7962 that I am using in standalone mode.
when I first got the AP its was running FW 8.1.1 and was able to transfer 15-17mbps through it to two different servers connected at 5ghz.
please note I am the only 5ghz network I can see.
Hi I have a Zone Flex 7962 AP that I use in (standalone) running firmware 188.8.131.52 I was able to upgrade from 8.0.0 to 184.108.40.206 using the web and the default settings although can anyone please advise if there is any new firmware available for this dev...
rkscli: get withholding-limit wifi0
wifi0: Withholding limit (auth response): 1
is that the message I was net to get also i cannot connect to the 5ghz ssid I have as I get an attempting to authenticate message
Managed to upgrade it had to use 9.7.0 first using IE 10 then I was able use the local upgrade option to upgrade to 9.7.2.
Can you please advise does 9.7.2 support band steering for a standalone zoneflex 7962 AP?
so first time I attempted it using TFTP it got to 98% then failed tried again and now I get
The upgrade failed. The following reason was given.
the control file may be bad
Here are some other things to check.
•Check that all network cables are fi...