This guide will explain, in details, how to disable two parameters that will cause that your Sonos devices can't pair with each other.
Command
Explanation
set qos eth0 directed multicast disable
This prevents the W...
Connecting an ICX to the Ruckus controller vSZ or cloud Pre-requisites
In this document will be found the best practice and support documentation to add a new ICX to the controller for the first time.
1: Your running version must be UFI, can be che...
How to enable PoE or gather the logs in case there is a failure via web access.
Symptoms and basic troubleshooting:
*All the devices are not getting power:
*But the data traffic is working, for example if you connect a computer will work.
*You have...
How to perform an Upgrade via Web GUI (ICX7150 Switch)
1: Find the IP address of your switch, you can use the next Guide as reference:
How to find my Ruckus “Devices IP address” using free applications
https://community.ruckuswireless.com/t5/RUCKUS...
How to Fix Routing code issues on Lennar Home users via Web Gui.
Symptoms:
Websites not loadingDevices getting disconnected or having problems working as intended.Network dropping at random points in time.Smart devices not being able to connect to...
Hi @dabel524
PREVIEW
If you found the master AP, but do not know the credentials, and you have tested the defaults, your only option will be to factory reset the system, so follow up the next steps:
1:Power off all the Access points by dis...
Hi @Mike1347
Based on the color, the power light probably is green and the 2.4 and 5G are Amber ones, so we required first to confirm if the Access Point is getting an IP address, this can be confirmed if the power light is green solid, we have an I...
Hi @KLopez
Thanks for the information provided, so far we can see the Access Point is powering up, however, is not getting an IP address, at this point, the best will be gaining access to the Switch and checking from there, I believe the orange conn...
If your issue is the certificate, you can re-generate them, for ICX7450 and for ICX7150 please get in touch with the TAC to open a case, and take into consideration that if the ICX7450 keeps failing with the certificate, same please get in touch with...
For ICX 7250, 7450, or 7750 models we can re-install the certificate, this information is on steps #7ICX(config)# crypto device-key-zeroizeICX(config)# crypto device-cert-zeroize
