CommScope RUCKUS Community Forums

Hello, I would like to know how to downgrade my ruckus T300 from unleashed mode to standalone mode. I have the ruckus in the most recent unleashed firmware but now i want to do a test moving back to standalone mode. I am trying to downgrade using ...

Hello, I would like to know how to downgrade the firmware version in a Ruckus T310c using the Unleashed network. The goal here is to downgrade the unit to a firmware version that works only with a standalone point mode to show my colleagues what the...

Hello, I was trying to configure the Ruckus AP T310c using the webpage http://unleashed.ruckuswireless.com but I cannot access the webpage when I am trying to configure. Steps: 1 - I have made reset to factory settings the device 2 - Connected to t...

Hello, I am having trouble to setup an access point that I have here. The AP is the Ruckus T310c. I have made an reset to factory setting by clicking for more than 4 seconds in the button right next the ethernet port. I had configured the PC ip ad...

Hello, I would like to know what is the best way to mount the Ruckus T310c to provide a good omni directional radiation. There is any information regarding this subject? I can see in the installation guide it is possible to mount the device in hori...