Hi James,You don't need to worry about large jumps in code on APs, they aren't like controllers where you need to upgrade carefully to preserve configurations.R710s are fully supported by SmartZone 6.1, so you can simply move them over, with zero-str...
You could utilise a colleague's tool (Crossbreeder) to do a bulk-firmware update. Details here: https://support.purdi.com/hc/en-gb/articles/360055531372-Flashing-Ruckus-Access-Points-Using-Crossbreeder
Hi Robert,Thanks for looping me in.As you've identified; you need a standard CAT5e (or better) cable, with an 8-core, X-Coded, M12 connector. These aren't exactly custom-made, but they are certainly specialist 'industrial grade'! Here's some online e...
My pleasure!The Unleashed master operates as a 'standard' AP as well as being the Master. There is the option to disable AP radio functions if you have specifically elected Master and Standby APs but this is optional. E.g. the APs are located in a n...
Hello!Currently SmartZone 144 is the Ruckus hardware controller appliance we would recommend to customers.Alternatively you can deploy an Unleashed network and nominate one or two (for redundancy) APs to act as controllers and not operate in AP mode....
