CommScope RUCKUS Community Forums

gsfakian · ‎03-20-2023

Hi to all... having some older APs migrated to my new vSZ i noticed that any access point running on 5.2.2.0.2064 fw (in the corresponding zone) do not have any WLAN assigned on them and they do not ...

a_ridwan9 · ‎03-12-2023

Dear everybody, I've question about creating backup and restore configuration (not cluster config). Existing, I've 2 Virtual Smartzone Essentials (with Cluster) and I've deployed 1 Virtual Smartzone...

QDoan · ‎03-14-2023

Hello. My SZ100 not boot normaly, now it boot lop, cant access via IP, so how to re-insatll firmware via USB drive for it ? THank you.

AdminHWE · ‎03-13-2023

...idnt work like expected. As Addon we got this wonderful feature, that the AP list is complete empty. Anybody knows how to get the AP list back? in the logs you can see that ruckus smartzone is l...

a_ridwan9 · ‎02-26-2023

Hello all member, I have a question. Is there any documentations which informed how many SSID that can be created/handled by vSZ-E into AP Ruckus? And how many the maximum value for SSID handled in ...

CHOIYOUNGJAE · ‎03-01-2023

Hello. We will contact you to try to resolve the issue. Now I have AP R310 connected to smart zone 100. When I connect to the controller web and see the access points tab, the channel assigned to ...

KDSM · ‎03-08-2023

Can I move existing AP's (R710) from one group to another without causing any issues? the AP's I'm going to move are in the same segment and I would be renaming those AP's Kris

CHOIYOUNGJAE · ‎02-13-2023

I am new to Ruckus equipment. I've searched for materials to solve the current problem, but I can't confirm the exact solution, so I'm asking. ■ List of equipment used Smartzone 100 R...

Liinad · ‎02-14-2023

Hello, I can't seem to find the answer to this. From the documents that I read a vSZ-D can support 10000 tunnels but it wasn't clear to me how to count those tunnels. Theoretical scenario: I ...

kim_seonmyeong · ‎02-08-2023

Does the switch, SZ or AP have a real-time TCP dump function? configuration description Structure of sending authentication packets to external authentication server using Proxy function in SZ Aut...

CommScope RUCKUS Community Forums

vSZ 6.1.1.0.959 - Older models (R500,T301s) do not...

Backup and Restore Configuration Virtual Smartzone...

SZ100 boot lop, how to install firmware via USB

After reboot AP List on Smartzones Empty

Maximum SSID in Virtual Smartzone

Channel status of AP R310 connected to smart zone ...

Moving APs from one group to another

Smart Zone 100 setting inquiry

vSZ-D count number of tunnels for remote sites

Authentication server does not assign dhcp ip