My smarthome was built in May 2018 and includes this switch, 2 R510 APs, and a Ring doorbell. I installed a Netgear R6400 router before the Amazon tech installed the smarthome package. I have added a...
I have one of the first 2018 Lennar smarthomes in our community with this switch, 2 APs, and a RING doorbell. They worked fine for 5 1/2 years and I had never tried to check anything until now. It a...
The light coming from the access point switches are green in the front and yellow in the back. This is on the the downstairs unit and upstairs unit. I have rebooted the system multiple times and each...
I am attempting to reconnect to my APs after a modem/router change. I am able to power up my switch - with green lights and wired connectivity - but not able to get any lights on the 2 APs (510) in t...
We received a ICX7150-C12P-2X1G with our new Lennar Build. We have three devices plugged into it that require PoE (Ring Elite Doorbell and two ZoneFlex R510 WAPs) For a little while the PoE has b...
ICX7150-C12P-2X1G I am a Lennar SmartHome homeowner and our Ruckus ICX-7150 switch stopped working. It doesn't turn on and has no status lights on. I have tested and confirmed that the power o...
My ICX7150-C12P switch has failed. Despite following the troubleshooting tips using guidance from this forum, the device appears to be non-operational. It will not even power on, no lights, I've trie...