CommScope RUCKUS Community Forums

stephenlatty · ‎03-16-2023

Hi, I am an inexperienced AP user. have recently purchased a Ruckus R710, which I have successfully integrated in a LAN for my Digital Image Technician equipment on film sets. I use it to control cam...

gsfakian · ‎03-15-2023

Hi to all. I am reading in release notes that its possible to adopt older models like R500 & T300/301 by putting them in a different zone which uses older AP version.. But how can i create such ...

gsfakian · ‎03-13-2023

Hi to all, the title describes my problem... i have managed to migrate 21 r710 but one insists not to migrate... It starts to accept the firmware from the sVZ but fails... I manually flash the stand ...

bnelSA · ‎03-08-2023

Hi everyone, I hope you're all doing well. Does anyone know how to set the MTU on the R500 AP via CLI? I have done this before years ago but cant remember how to do it.

MauC001 · ‎03-05-2023

Hello Ruckus community! I have a problem, I need to change the management IP of my Ruckus AP-R320 but I can't directly access its assigned IP locally, I can only configure some parameters via CLOUD,...

Hiro · ‎02-22-2023

Hello everyone. Thank you for all your great tips. We are currently experiencing the title trouble in the following environment. Controller: vSZ-H (ver. 5.2.2.0.317) AP: Ruckus R650 (ver. 5.2.1.0...

FCervini · ‎02-07-2023

Hi all, We have R310 AP's with a Zonedirector 1200. Recently we started noticing short break ups in the Wifi connectivity many times a day. When looking at the log of an AP I can see a lot of the fo...

Ed-E · ‎02-20-2023

Hi all, I have a r710 on latest firmware 200.13.6.1.319 and I only getting 70Mbps on 5ghz and my internet speed is 1gig. Any ideas? I have hard wire tested from the cable modem to the ethernet plug...

KDSM · ‎02-16-2023

I'm replacing and failed R710 with a new one but can't get it to work. I'm using Virtual SamrtZone version 5.2.2.0.317 the unit powers up and it shows in SmartZone in the Staging Zone. I have...

gibbo · ‎02-20-2023

My ZoneDirector ZD1200 is running 10.5.1.0 build 124 and all my R500 APs are running that firmware. I've had to purchase a second hand replacement R500 access point, ZoneDirector sees it, bu...

CommScope RUCKUS Community Forums

Wireless Radio Settings on R710 to limit my interf...

vSZ 6.1.1 and older access points (r500 & t301)

R710 cannot migrate from ZD3050 to sVZ 6.1.1

Set MTU on Ruckus R500

How to change management IP / disable DHCP

Poor WiFi connection in Intel AX210,AX211

A lot of probe requests

r710 - very slow on 2.4ghz and 5ghz

Adding R710 to Virtural SmartZone

R500 - need firmware