...roadcast packets to eth1/1/3 connecting to different switch? Because route-only L3 interface is still a member of vlan1 by default on ruckus switches. --- ! ! SWITCH-A ! vlan 1 name DEFAULT-VLAN b...
I am currently running firmware version SPS08090g on my ICX7150-C12P. I feel like this firmware version is pretty out of date and was looking online which is the best to upgrade to ...
Hi, I have the following bug to report. Platform: Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Aug 8 2023 at 22:37:59 labeled as SWR08095m
...
Is there any way to change the fan speed at bootup from high to low in the ICX 8200? We are trying to nail down network configurations in our office and every time we need to reset the rack everyone ...
Hi, I recently upgraded several ICX 8200s to 1010c-cd1, which went smoothly except for one switch. This happens to be the only switch with a layer 3 license on it. I can no longer SSH to it using my ...
I'm having issues with speeds and have been doing further troubleshooting. The uplink from my 7250 is going to an OLT(Zhone) and is set to 10g. However, when I look at the port I have a ton of queued...
Hello, We have three ICX7150-48P SW Running Image Version:08.0.90dT211. Can you tell me what version is recommended, and can it be updated directly to the latest version, or are there some required ...