I have 20-25 APs to migrate from Zone Director 1200 to Ruckus Cloud and the migration is not going smoothly to say the least. I started by changing my AP to DHCP and assigned a static address on my D...
i want to check the AP is getting internet or not. how can I log in (SSH or HTTPS) to ruckus cloud-managed AP so that I can log in to AP and ping or traceroute the Internet from AP .
Hi Ruckus, I received the notification of 8 dec datacentre shifting and I have question. If i add firewall rule, what is the source ip address I need to add? It is the local users ip address right?...
When trying to create a second Wireless network with Enterprise AAA (802.1X) in the Ruckus Cloud, I receive the following message: Server Configuration Conflict One of the values you entered confli...
If I add a license in auth.wireless.ruckus, will it get added into asia.ruckus.cloud or ruckus.cloud?
It is pretty confusing because I can control both of them.
For ruckus cloud, APs can be ...
My previous setup is cisco AP with WLC. The WLC is configured with DHCP function for the users and AP. Now users are planning to migrate to ruckus AP due to cost. Of course ruckus cloud is being used...
I have to enable SNMP for the APs in our Cloud Controller, but i cant find the Setting for this. Ping is working, but SNMP request not, so i think its disabled. Since the Firmware 200.1.9.12.62 MR S...
I'm trying to setup a new guest portal and am unable to find documentation on the recommended size for the "Your Logo goes Here". I've tried a logo that's 2294x298 and one the same logo ...
hello, as for as I can understand, the only way to change dot1x radius timeout on ruckus AP is connecting to the ap via ssh and using the radius-server timeout command; but I read somewhere cloud c...