I have a bunch of Ruckus T710 and T610 access points that are currently running 5.2.2.0.2069 firmware that I'd like to upgrade to 6.1.1.0.1274 firmware so that they are aligned with our Data Plane. W...
I have 3 very old R500 APs in my home that were installed by previous home owner and were controlled by a zone director 1200. But I was not able to access the controller. I had to build a...
'lo, all. I'm new to Ruckus devices, so kindly forgive my ignorant questions. Our office has two active R510 APs running 200.15.6.12.304, with one as master. We also have two ZF7372 (104.0.0.0.1347)...
Recently bought two R770 AP for WiFi7. I have brought a vSZ-E on hyper-V . I could see R770 has came with solo firmware 122.0.0.0.722. Hence I don't think it will directly join a controller with 6.1...
Hello, I have a Zonedirector ZD3025 working fine with a lot AP in my infrastructure, a lot of AP r600 be discover automatically by this Zonedirector. i received two new AP 720, and they n...
Hi Guys maybe someone can help please, I am having issues with a new r770 out of the box. First of all the web interface is not enabled and I am having to enable it via command line with "set http e...
Hello, I have a network with 3 Ruckus devices 2 R710's and 1 R750 (the R750 is not a dedicated master). I observe that when I am connected to a R710 and move a point there a handoff to the R75...
I recently purhcased a ruckus R770. Very basically I've tried to follow the AP Setup guide on the ruckus website but haven't been able to complete it. I'm using a POE Injector ( TRENDne...
Hi There, We're currently experiencing some issues with a high number of DHCP connection failures reported on our AP's in our VSZ. For some context, we are a K-12 school with 15 seperate buildings. ...
I have three APs - 720, 720, 710. They all are running POE and are configured as mesh even though they have ethernet connections. I have a number of questions: - if I run AP-AP speedflex will I get ...