H550 Standard AP Want to upgrade to Unleashed H550_200.12.10.5.234.bl7 using local Connected over Ethernet. The following error occurred: Failure Reason: [AP RFW : Unable to resolve host name for...
Hello, I have a lot of R550's getting powers from different manufacturer switches but they all seem to have the same warning about not getting enough power. These are running the...
rkscli: I am trying to login at ruckus cli and getting only this option not able to go in enable mode or config mode only rkscli: this is showing after login and no commands are w...
Hi.
I just bought a ZD1200. It was new, but i bought it over Ebay.
I have a ZD 1000 and wanted to upgrade it with the ZD 1200 because i want to connect more than 25 Acces points.
On the o...
When I try to connect the R500 AP to the SZ-100 E controller. In that case, that particular AP's mesh role is turned down to the disabled state. Then I checked the scg configuration through the AP's ...
Newby here
I have a 7150 stack and have a bootrom mismatch. I tried to update the bootrom using TFTP
copy tftp fla 10.70.11.143 mnz10115.bin bootrom but got the error
Inval...
I am looking for a command to list all unused ports for a long period of time. I have tried different combinations but not not getting complete info, none of them listing the interface
sh int | ...
The new controller connects to the AP and proceed to update it’ firmware but is unable to complete the update and shows the AP as Disconnected.
ZD1200 is on S/V 10.1.1.0 build 79
R710 is on S/V 9...
One of our customers is running firmware version 10.4.1.0 build 214 on a ZD1200. The latest version is 10.2.1.0 build 183???
How can this version have a lower version number and can I install the l...