Hi There, We're currently experiencing some issues with a high number of DHCP connection failures reported on our AP's in our VSZ. For some context, we are a K-12 school with 15 seperate buildings. ...
I have three APs - 720, 720, 710. They all are running POE and are configured as mesh even though they have ethernet connections. I have a number of questions: - if I run AP-AP speedflex will I get ...
Is it possible to put master and slave AP in different broadcast domain. I can make routing and IGMP policy for 2 different physical network but I can connect them directly.
I got two used T610 and want to install them in school there I have a small WiFi net on R710/R610. With the first one, there were not any issues: factory reset, login, flash unleashed firmware Howe...
Hi All, My WLAN got disabled, and I did a factory reset of ruckus switch and 3 APs (R510). All the 3 APs have solid green power light. Two of the APs have fast (2x) blinking green light, whi...
Sorry for the duplication, I mixed something. Device: r730 for home use, solo rkscli: get version
Ruckus R730 Multimedia Hotzone Wireless AP
Version: 114.0.0.0.6565
rkscli: get channel wifi1
wifi1 ...
Hello. I have a Ruckus ZoneFlex T300 and I want to know what does the ethernet leds means. For example: Left led is blinking and has the color amber but the right led is off. Another case i...
Hello Ruckus community! I have a problem, I need to change the management IP of my Ruckus AP-R320 but I can't directly access its assigned IP locally, I can only configure some parameters via CLOUD,...
I snagged a Ruckus R700 off eBay and tried to set it up by first resetting it, then connecting the R700 to my laptop and going to the default IP and it will not load the GUI. I tried to find the IP a...