The other day I ran the following commands on my R650s with Unleashed 200.14.6.1.203: enable ap-mode set qos igmp_query v2 enable set qos igmp_query v3 enable set qos mld_query v1 enable set q...
I have some R500s, firmware is 200.7, and two R610s firmware is 200.7 too. Any possible to do that: 1. I prefer to set two R610s as unleashed master, r610-1 for master , r610-2 for master backup. w...
I was trying to set up some mesh APs with Zero Touch Mesh on an Unleashed master AP that was configured with Gateway Mode. I could add SNs to ZTM in the admin console but they would not mesh when b...
Hello, I have noticed that three separate wireless clients are only able to achieve donwnlink throughput roughly half of the uplink throughput when connecting to a Ruckus R710 running Unleashed 2...
Ruckus Unleashed. 3x R710s. Anyway to configure a syslog custom port? Reviewed GUI + CLI after upgrading them to 200.12.10.105.100 from very outdated firmware. Don't believe s...
Ruckus R500 Unleashed firmware 200.7.10.202.141 I have two R500 and each shows as Master under Access Points (i.e., two masters and no members). I have attempted the following without success to h...
I understand that the R650 APs loaded with the unleashed firmware need to be converted to standalone APs first by uploading a 11x.x.x.x firmware but when I try this on the unleashed interface under a...
I have 3x R610 AP's running the latest Unleashed Firmware Version 200.14.6.1.203 and 3 other R500 AP' with the latest supported version for them which is Unleashed 200.7.10.202.145. I...
Hi to all, I've started managing a little infrastructure with 13 R310 access points coordinated by a R510 unleashed master. The client have requested to add 3 more access points and I would have b...
...etwork appliances e.i. AP’s, Firewall, switches Etc), i cant get a DHCP lease. and i know why. its because i gave the master AP an IP address (on the management segment vLan) on the default unleashed v...