cancel
Showing results for 
Search instead for 
Did you mean: 

Users unable to get IP address after several months running normally!

flavio_borup
New Contributor III
My ZD is 9.9.0.0 build 216 and i can ́t do any change right now
I have several old APs which doesn ́t allow me to upgrade

I ́m running this very same solution in the last 3 years with no problems at all

Yesterday, some users complain about the were unable to get IP addresses

My DHCP Server is a Windows 2012
My Ruckus environment have 12 APs and several SSIDs and Serveral VLANs
My network uses HP/3COM Switchs models 2600, 5550, etc


After doing a investigation:

The problem only affected a single SSID and is related to a single VLAN
At DHCP Server logs, i can see SOME clients are still able to get IPs, but randomly, some users can ́t. After some network tracing, i can see DHCP requests arriving at DHCP Server and all requests that come to DHCP are served with no problem. 

But the clients with problems, the DHCP request does not arrive at the interface, for some reason, the traffic was blocked at some point and the DHCP packets were not arriving at the DHCP Server.. Again, for some clients, other can connect with no problem.

Yesterday, afet several months of uptime i rebooted my ZD and all things got normal again. Ok, maybe it was a "glitch", anyway, after the reboot.. everyting got back normal

Today, the problem is back! After some tests i did the following: I changed the VLAN ID of the SSID and clients were able to get IP address again (each VLAN has its own IP range), so, in the new range, things were nromal. And, after re-configuring back as before, the problem was gone. First a reboot, now a little change in configuration to solve the problem. Weird!

Some monutes ago, the problem is back again! and i didnpt reboot yet, but now, no matter what change i do, the problem is here, some clients can leas IPs and some not (randomly) and if the pacjets arrive at DHCP Server they ́re leased with no problem, but some packets simply didn ́t arrive at the DHCP Server interface to be processed

So, what ́s next? What should I do?
28 REPLIES 28

flavio_borup
New Contributor III

Full DHCP Discover captured by WS, at the remote interface connected to the AP:


Frame 45478: 360 bytes on wire (2880 bits), 360 bytes captured (2880 bits) on interface 0
    Interface id: 0 (rpcap://[10.121.60.59]:2002/any)
    Encapsulation type: Linux cooked-mode capture (25)
    Arrival Time: Apr 16, 2019 16:47:29.913063000 E. South America Standard Time
    [Time shift for this packet: 0.000000000 seconds]
    Epoch Time: 1555444049.913063000 seconds
    [Time delta from previous captured frame: 0.194345000 seconds]
    [Time delta from previous displayed frame: 14.868523000 seconds]
    [Time since reference or first frame: 41.932491000 seconds]
    Frame Number: 45478
    Frame Length: 360 bytes (2880 bits)
    Capture Length: 360 bytes (2880 bits)
    [Frame is marked: False]
    [Frame is ignored: False]
    [Protocols in frame: sll:ethertype:ip:udp:bootp]
    [Coloring Rule Name: UDP]
    [Coloring Rule String: udp]
Linux cooked capture
    Packet type: Broadcast (1)
    Link-layer address type: 1
    Link-layer address length: 6
    Source: SamsungE_45:8a:17 (d0:59:e4:45:8a:17)
    Protocol: IPv4 (0x0800)
Internet Protocol Version 4, Src: 0.0.0.0, Dst: 255.255.255.255
    0100 .... = Version: 4
    .... 0101 = Header Length: 20 bytes (5)
    Differentiated Services Field: 0x10 (DSCP: Unknown, ECN: Not-ECT)
        0001 00.. = Differentiated Services Codepoint: Unknown (4)
        .... ..00 = Explicit Congestion Notification: Not ECN-Capable Transport (0)
    Total Length: 344
    Identification: 0x0000 (0)
    Flags: 0x02 (Don't Fragment)
        0... .... = Reserved bit: Not set
        .1.. .... = Don't fragment: Set
        ..0. .... = More fragments: Not set
    Fragment offset: 0
    Time to live: 64
    Protocol: UDP (17)
    Header checksum: 0x3986 [validation disabled]
    [Header checksum status: Unverified]
    Source: 0.0.0.0
    Destination: 255.255.255.255
    [Source GeoIP: Unknown]
    [Destination GeoIP: Unknown]
User Datagram Protocol, Src Port: 68, Dst Port: 67
    Source Port: 68
    Destination Port: 67
    Length: 324
    Checksum: 0x4162 [unverified]
    [Checksum Status: Unverified]
    [Stream index: 28]
Bootstrap Protocol (Discover)
    Message type: Boot Request (1)
    Hardware type: Ethernet (0x01)
    Hardware address length: 6
    Hops: 0
    Transaction ID: 0xd585f0f8
    Seconds elapsed: 32
    Bootp flags: 0x0000 (Unicast)
        0... .... .... .... = Broadcast flag: Unicast
        .000 0000 0000 0000 = Reserved flags: 0x0000
    Client IP address: 0.0.0.0
    Your (client) IP address: 0.0.0.0
    Next server IP address: 0.0.0.0
    Relay agent IP address: 0.0.0.0
    Client MAC address: SamsungE_45:8a:17 (d0:59:e4:45:8a:17)
    Client hardware address padding: 00000000000000000000
    Server host name not given
    Boot file name not given
    Magic cookie: DHCP
    Option: (53) DHCP Message Type (Discover)
        Length: 1
        DHCP: Discover (1)
    Option: (61) Client identifier
        Length: 7
        Hardware type: Ethernet (0x01)
        Client MAC address: SamsungE_45:8a:17 (d0:59:e4:45:8a:17)
    Option: (57) Maximum DHCP Message Size
        Length: 2
        Maximum DHCP Message Size: 1500
    Option: (60) Vendor class identifier
        Length: 18
        Vendor class identifier: android-dhcp-7.1.2
    Option: (12) Host Name
        Length: 24
        Host Name: android-4e8617727f4e6848
    Option: (55) Parameter Request List
        Length: 10
        Parameter Request List Item: (1) Subnet Mask
        Parameter Request List Item: (3) Router
        Parameter Request List Item: (6) Domain Name Server
        Parameter Request List Item: (15) Domain Name
        Parameter Request List Item: (26) Interface MTU
        Parameter Request List Item: (28) Broadcast Address
        Parameter Request List Item: (51) IP Address Lease Time
        Parameter Request List Item: (58) Renewal Time Value
        Parameter Request List Item: (59) Rebinding Time Value
        Parameter Request List Item: (43) Vendor-Specific Information
    Option: (255) End
        Option End: 255
    Padding: 00



flavio_borup
New Contributor III
At the DHCP Server, using network traffica capture i can see all ACKs and NACKs (just a few, filtered-out by my policies)  and i can see some clients from that particular VLAN working with no problem, but for some clients (randomly) the packets didn ́t arrive in any way in the DHCP Server interface. I ́m pretty confident that the DHCP Server is running and doing its job, i never got a single problem, if the packet arrives ath the DHCP Server, the IP is leased, the clients with problems, the packets are not reaching DHCP Server

andrew_giancol1
Contributor III
possible you may need to reboot that AP, next thing i'd check is ARP entries for the interface mapped to the proper Vlans on your switched network.

andrew_giancol1
Contributor III
Flavio, yesterday had a similar incident to yours, though the problem presents with different equipment ( was happening to all Wireless clients on Vlan 10, 3 and all of our hardwired credit cards on vlan 7 we ended up needing to reboot a couple of switches. best as we can tell, we had some mac flapping that ended up with Spanning Tree pruning a few vlans. We're running a composite of Cisco and Arris, so rebooting the Cisco resolved the issue immediately. 

flavio_borup
New Contributor III
Thanks for the input. Thinking about it, i ́m not confident that this is my case, but sure, is very unlikely, but not impossible. IN my case we have 2 X Core L3 Switchs and a dozen os L2 Edge Switches, we ́re mapping the case, to check if they ́re could be related to a series fo switchs or if thyey ́re spreaded arround the corp

untill now, no rogue DHCP servers were found (despite some very weird Chinese-MAC-address  found) 

The WS networ traffic captures are still running, we ́re a little limited on when we can do changes and tests because we got error sometimes, so we ́re are still looking for DHCP packets on eth2 of the AP