cancel
Showing results for 
Search instead for 
Did you mean: 

ver 08.0.70aT213 for ICX 7450 campus switches

michael_fonda
New Contributor

Hi All,

I'm having a difficult time locating this specific firmware rev that we're using in our environment:

(ver 08.0.70aT213) 

We have some legacy deployments that use ICX 7450 switches where we wish to use this firmware until we are ready to roll them up.

Is it possible to get a hold of this still?

Thank you!

Mike

1 ACCEPTED SOLUTION

hashim_bharooc1
RUCKUS Team Member

Hi Michael,

It is 08070 code and has been un-published due to not fixable defect.

You should get the latest version of code and should be able to use the same config.

It has a lots of defects that were in 8090 and prior releases.

Please download 08090h code from here:
https://support.ruckuswireless.com/software/2806-ruckus-icx-fastiron-08-0-70h-software-release-zip

Hope this helps.

Thanks

Hashim

View solution in original post

2 REPLIES 2

netwizz
Contributor III

You should be able to find it.  If not, download it off of a device, validate its checksum, and then send it to other switches.

Best regard,

Justin

hashim_bharooc1
RUCKUS Team Member

Hi Michael,

It is 08070 code and has been un-published due to not fixable defect.

You should get the latest version of code and should be able to use the same config.

It has a lots of defects that were in 8090 and prior releases.

Please download 08090h code from here:
https://support.ruckuswireless.com/software/2806-ruckus-icx-fastiron-08-0-70h-software-release-zip

Hope this helps.

Thanks

Hashim