Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ICX 7150-24-4X10GR specification

Dear support,Could you help to confirm that ICX7150-24-4X10GR can meet the requirement as below. Thanks1. Shall provide not more than 200ms stack convergence2. Shall provide link redundancy without enabling any Spanning Tree Protocol3. Shall have emb...

yee_nok_li by New Contributor II
  • 2 replies
  • 1 kudos

Unable to add ICX 7150 C12P switch to Unleashed dashboard

Trying to add the ICX switch to the dashboard under the 'Switches' section.  When I add the IP address and login info, it forever says 'Connecting'.  In the switch logs, I see the following...May 21 11:00:04informationalSecurity: SSH terminated by ad...

Port use on ICX7150-C12P-2X10G

I need some help understanding what I do with a C12P switch (came with my Lennar home).I'd (ideally) like to set up VLANs for smart home use. However, I can't run all cables to a single switch. I need to use two. Uplink ports:Can I use the "uplink" p...

ICX7250-24 Firmware Update

I have the ICX7250P-24 with the below characteristics: Version 08.0.30hT211, SPS08030h.bin, spz10106.bin and i want to update it to the newest version. I have tried with several usb sticks, with TFTP server and with Web Gui but with no success.