Switches
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Lost POE on two 6450 switches after power outage

Lost POE on two 6450 switches after power outage.Have multiple ICX 6450 switches deployed in a large store in Oregon.  Thanks to power outages last night...  all the switches came up, but two are not longer providing POE.  Tried reloading, hard reboo...

Questions Regarding Wireless Deployment

Hi Guys,I am planning to deploy a Ruckus Wireless solutions on user premises however I am having a few questions that has been going around in my mind.Below image will be the simple diagram for this deployment. The idea is basically to have a multipl...

ICX 7150-24P corrupted flash?

Switch lost it's configuration after a power outage.During boot i am getting the following messages:Starting kernel ...booting with 4.4 kerneldd cmd: UBIConfig partition mountedUBIFS error (ubi1:0 pid 566): ubifs_recover_leb: corrupt empty space LEB ...

nomatch by New Contributor II
  • 75 Views
  • 2 replies
  • 1 kudos

Resolved! ICX 7150-24P corrupted flash?

Switch lost it's configuration after a power outage.During boot i am getting the following messages:Starting kernel ...booting with 4.4 kerneldd cmd: UBIConfig partition mountedUBIFS error (ubi1:0 pid 566): ubifs_recover_leb: corrupt empty space LEB ...

nomatch by New Contributor II
  • 107 Views
  • 4 replies
  • 1 kudos

ICS 7150-c12p / R510 X 2 setup question

I about to close on my house which in installed with a ICS 7150-c12P + 2 access points R510.  They builder doesn't do the configuration themselves.  But have a installer we can setup a few weeks after we close.  But we seen / heard to many in the hoo...

dan_auga by New Contributor
  • 62 Views
  • 3 replies
  • 1 kudos