cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade path for ICX7450 (currect version SPS08030e and SPS08030k

laura_pineiro
New Contributor II
Hello,
I'm planning to upgrade my ICX switches (I have a bunch of them). They are at versions 08030e and 08030k. I'm new in brocade technology and I'm trying to figure it out how to choose the version for the upgrade. I saw the last version 0807 is supported by my switches, but I'm not sure if I can upgrade directly to that or if I have to follow a sequence of upgrades to finally install the last version. Can some one highlight me on this, please?

Thanks in advance for your help
4 REPLIES 4

BenBeck
Moderator
Moderator
Hey Laura, 

I would advise staying on 8030 code stream for now as it is the most mature. I would say move to the latest patch, however. Generally speaking you can make a direct jump from 8030 to 8070. If there are caveats, they should be listed in the release notes. If you are ever uncertain, you can open a case and TAC will let you know as well. 
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

laura_pineiro
New Contributor II

Thanks a lot. I think I'll follow your recommendations.


prasad_kawadkar
New Contributor II
Hi,

Pls go through the below document...Image_ images_messages_5f91c444135b77e2479f7f91_895d4172f21254eedd8b5f837994a3a1_RackMultipart20180418121298121-8844f2b8-c950-44d2-afae-26ff04de2123-1393395775.JPG1524066077Image_ images_messages_5f91c444135b77e2479f7f91_8e158f6dd952c6b0218bb7b58c68d940_RackMultipart20180418578341l7u-81e48d70-5592-4a2e-8531-5a16976d1ed4-1827193394.JPG1524066174

prasad_kawadkar
New Contributor II
Pls go through the document