cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus ICX AAA

irakli_gvishian
New Contributor III

Hello, I have configured Authentication/Authorization on my Ruckus ICX 7150 swithes via AAA (Tacacs+(Cisco ACS)). Authentication/Authorization works fine via SSH, but as I have discovered console doesn't work anymore. I connect the cable to console port but nothing happend  

Here is my config:

aaa authentication login default tacacs+ local

aaa authentication login privilege-mode
aaa authorization commands 0 default tacacs+ none
aaa authorization exec default tacacs+ none
aaa accounting exec default start-stop tacacs+

Which command I have missed?

Thanks.

5 REPLIES 5

irakli_gvishian
New Contributor III

upd

irakli_gvishian
New Contributor III

upd

BenBeck
Moderator
Moderator

Hey There, 

You would need the following to enable console auth:

ICX(config)#enable aaa console

Are you saying you are getting no console response at all? If that is the case, that would have nothing to do with the configuration. You should get some response on console no matter the configuration. 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

irakli_gvishian
New Contributor III

Hello ben_beck, thanks for your reply. 

I tried with enable console aaa, but situation is the same. 

Yes, no response at all.