cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus 7750 - BGP per VRF

corey_costello
New Contributor III

HI, 

I am on a bit older code but can the 7750 platform on newer code do BGP per vrf? 

 

The current code I am on can only do BGP in the main table, and VRFs are limited to OSPF / VRRP. 

2 REPLIES 2

BenBeck
Moderator
Moderator

Hey Corey, 

What code are you on? I have not personally set up per-vrf BGP. Let me check on it and get back to you. 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

BenBeck
Moderator
Moderator

Hey Corey,

Are you just looking for the option such as below? I see this in 8090 which is the recommended code for ICX7750.

ICX7750-48C Router(config-bgp-router)#address-family ipv4 unicast vrf blue

Or are you looking for the whole instance to be within the VRF such as the following for OSPF?

device(config)# router ospf vrf corporate

I do not believe this exists in any code. 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us