cancel
Showing results for 
Search instead for 
Did you mean: 

Port Up Down but link Normal and Intermittent on ICX 7150-24F

agus_rohman
New Contributor II

Hi 

i have Ruckus ICX 7150-24F with Cooper SFP. 

can you help me, how to read this logging on my switch, 

The link on these port is normal but intermittent. 
 Image_ images_messages_61b17c9149c6e64e2a501452_5c0acf81e94cd3ecf1d5537801146c1c_ICX-50e09118-2a2c-445a-94c4-1a812e9f0316-1930835303.PNG

thank you

9 REPLIES 9

BenBeck
Moderator
Moderator

Hey there,

These specific state up/down messages are layer 1; think signal on the wire. I would check the cables, patch paneling, etc. Also, are the optics supported or third party?

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

agus_rohman
New Contributor II

@ben_beck 

hi there 

thanks for answering my question.

the cable is fine, already to check on the other device, the topology is port 1/20, 1/21, 1/23 connect to other switch non icx 1/2,1/3,1/5 via copper sfp. and on the oppenent switch the port is normal, no updown like on ICX log.

what does mean ?

thank for your help 

The message seen is layer 1 related, so this would generally be optic, media, patch-panel, etc. 

Is this a ruckus-supported optic?

show media validation

show media eth x/y/z

Have you used these optics elsewhere on ICX switches without issue?

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

agus_rohman
New Contributor II

no issues these optic use on other icx