PoE Issue ICX 6430C12

[Tistopher]

Hey Guys,

Appreciate this is an old switch and don't suspect anyone to spend much time helping me. I've got a C12 Brocade which I acquired some years back. I just use it for LAB purposes, however I noticed today I tried plugging in a test phone and it will not power via PoE (first 4 ports) I'm running the latest Image and Boot for this model.

See below output for port config and inline power. (Troubleshooting steps is rebooting switch, disable renabled of port, set PoE Class as 1 on the port as this is a Cisco phone. Also I have re-installed the PoE firmware.

interface ethernet 1/1/1
port-name PoE.Port
inline power power-by-class 1
!
interface ethernet 1/1/2
port-name PoE.Port
inline power
!
interface ethernet 1/1/3
port-name PoE.Port
inline power
!
interface ethernet 1/1/4
port-name PoE.Port
inline power

Test-Switch#show inl power

Power Capacity: Total is 68000 mWatts. Current Free is 68000 mWatts.

Power Allocations: Requests Honored 0 times

Port Admin Oper ---Power(mWatts)--- PD Type PD Class Pri Fault/
State State Consumed Allocated Error
--------------------------------------------------------------------------
1/1/1 On Off 0 0 n/a n/a 3 n/a
1/1/2 On Off 0 0 n/a n/a 3 n/a
1/1/3 On Off 0 0 n/a n/a 3 n/a
1/1/4 On Off 0 0 n/a n/a 3 n/a
--------------------------------------------------------------------------
Total 0 0

Test-Switch#sh inl power det

Power Supply Data On stack 1:
++++++++++++++++++

Power Supply Data:
++++++++++++++++++

Power Supply #1:
Max Curr: 1.2 Amps
Voltage: 54.0 Volts
Capacity: 68 Watts

POE Details Info. On Stack 1 :

General PoE Data:
+++++++++++++++++

Firmware
Version
----------------
02.3.9 Build 036

Cumulative Port State Data:
+++++++++++++++++++++++++++

#Ports #Ports #Ports #Ports #Ports #Ports #Ports
Admin-On Admin-Off Oper-On Oper-Off Off-Denied Off-No-PD Off-Fault
-------------------------------------------------------------------------
4 0 0 4 0 4 0

Cumulative Port Power Data:
+++++++++++++++++++++++++++

#Ports #Ports #Ports Power Power
Pri: 1 Pri: 2 Pri: 3 Consumption Allocation
-----------------------------------------------
0 0 4 0.0 W 0.0 W

Thanks,

Chris

[BenBeck]

Is there anything useful in 'show log' when the POE devices try to come up? It looks like you have done most of the main troubleshooting steps already. POE firmware shows intact, so it is a bit interesting that POE is not working.