cancel
Showing results for 
Search instead for 
Did you mean: 

ICX7150 trying to access Ruckus Wireless Device Registrar

teddy_brewski
New Contributor

Hi,

ICX 7150-24 version 08.0.80dT211.

There are continuous attempts to access 35.160.244.72 and 52.34.241.9 over 443/tcp via Management interface which seems to be linked to Ruckus Wireless Device Registrar.

What exactly is transmitted and how to disable it?  'no web-management http' is already done.

Thank you.
7 REPLIES 7

ryan_guerrero_6
RUCKUS Team Member
Hi Teddy

you can save your config and
#erase start
#reload

that should stop the continuous attempts to access 35.160.244.72 and 52.34.241.9 over 443/tcp via Management interface.

vincent_felisaz
Contributor
Hello,
This is a new feature added since 8.0.80c release and active by default to automatically register the switch to your existing SmartZone. Did you try the "no sz registrar" command?
Regards

Thanks!

Yep, that is the command, no sz registrar.

The registrar is introduced on request of customers that want to easily let the switch know on which IP or FQDN the management platform is (vSZ/SZ).

With version c it is standard enabled, and with ca, it is standard disabled, with d it is enabled again by default, and you can use the no sz registrar to disable it.

The same system is used on AP's for finding  the controller.

regards
Martin