cancel
Showing results for 
Search instead for 
Did you mean: 

ICX-7450 PoE always on option?

b8
New Contributor III
Recently moved over from a Juniper EX4300 series switch and the only feature I'm missing is the ability to keep PoE ports powered up during reboots. I have a number of PoE devices that I'd like to keep powered during reboots, AP's, NTP clocks, IoT devices and Raspberry Pi's etc. Not that I expect to reboot often once the initial config is done but it was handy on the Juniper from time to time. 
1 REPLY 1

BenBeck
Moderator
Moderator
This is not currently an option. We enable POE by default on 8070+, but POE will flap upon reboot. You could put in an RFE (request for enhancement) with your account team and it could be considered for future releases/models.
Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us