cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7150 c12p - AP with multiple VLANs

casper_pedersen
New Contributor III

Hi,

I've not been able to find an answer for this. I have multiple VLANs on being tagged by my Access Point (R610 for now, will get more later):

default (50)

default-iot(200)

The AP is connected to an 7150 (PoE), and when I try to tag multiple VLANs to the same port I'm told that is not possible.

How would I accomplish this?

R610-AP(50,200) -> ICX-7150-c12p -> Router

The ICX is then connected to my pfSense router which has all the VLANs configured incl. providing DHCP/DNS, that part is working.

I do not need inter-vlan routing as I only need to separate off devices which should not be able to talk to anything else.

Thanks.

Cheers,

Casper

1 ACCEPTED SOLUTION

vincent_felisaz
Contributor

Hi Casper,

Nothing complex here. On the ICX just do :

  • vlan 50 200
  • tag eth 1/1/x

Which error message did you get ?

Cheers

Vince

View solution in original post

2 REPLIES 2

vincent_felisaz
Contributor

Hi Casper,

Nothing complex here. On the ICX just do :

  • vlan 50 200
  • tag eth 1/1/x

Which error message did you get ?

Cheers

Vince

casper_pedersen
New Contributor III

Hi Vincent,

Thank you that did it. I tried (I think) to do it the other around. Problem has been solved, which is the main thing.

Thanks.

Cheers,

Casper