cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7150 Stack broke after upgrade. Shows 0000.0000.0000 for macs

daniel_howard
New Contributor II

From Unit 1

Current stack management MAC is c0c5.208f.b839
SSH@SEBHSAvigilon#show run
Current configuration:
!
ver 08.0.90dT211
!
stack unit 1
  module 1 icx7150-24p-poe-port-management-module
  module 2 icx7150-2-copper-port-2g-module
  module 3 icx7150-4-sfp-plus-port-40g-module
  priority 200
  stack-port 1/3/1
  stack-port 1/3/3
stack unit 2
  module 1 icx7150-24p-poe-port-management-module
  module 2 icx7150-2-copper-port-2g-module
  module 3 icx7150-4-sfp-plus-port-40g-module
  stack-port 2/3/1
  stack-port 2/3/3
stack unit 3
  module 1 icx7150-24p-poe-port-management-module
  module 2 icx7150-2-copper-port-2g-module
  module 3 icx7150-4-sfp-plus-port-40g-module
  stack-port 3/3/1
  stack-port 3/3/3
--More--, next page: 

SSH@SEBHSAvigilon#show stack
T=47m27.7: alone: standalone, 😧 dynamic cfg, S: static
ID   Type          Role    Mac Address    Pri State   Comment
1  S ICX7150-24P   alone   c0c5.208f.b839 200 local   None:0
2  S ICX7150-24P   member  0000.0000.0000   0 reserve
3  S ICX7150-24P   member  0000.0000.0000   0 reserve
4  S ICX7150-24P   member  0000.0000.0000   0 reserve
5  S ICX7150-24P   member  0000.0000.0000   0 reserve
6  S ICX7150-24P   member  0000.0000.0000   0 reserve


     +---+
  3/1| 1 |3/3
     +---+
Current stack management MAC is c0c5.208f.b839

From Unit 5

SEBHSAvigilon(config)#show stack
T=4d21h39m28.3: alone: standalone, 😧 dynamic cfg, S: static
ID   Type          Role    Mac Address    Pri State   Comment
1  S ICX7150-24P   member  0000.0000.0000   0 reserve
2  S ICX7150-24P   member  0000.0000.0000   0 reserve
3  S ICX7150-24P   member  c0c5.208f.c059   0 remote  Ready
4  S ICX7150-24P   member  0000.0000.0000   0 reserve
5  S ICX7150-24P   active  c0c5.208f.bdd9 100 local   Ready
6  S ICX7150-24P   standby c0c5.208f.3879   0 remote  Ready

    active       standby
     +---+        +---+        +---+
  3/1| 5 |3/3--3/1| 6 |3/3--3/1| 3 |3/3
     +---+        +---+        +---+
Standby u6 - protocols ready, can failover
Current stack management MAC is c0c5.208f.b839

SSH@SEBHSAvigilon#show ver
  Copyright (c) Ruckus Networks, Inc. All rights reserved.
    UNIT 1: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
      (28660224 bytes) from Primary SPS08090d.bin (UFI)
        SW: Version 08.0.90dT211
      Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
       Compiled on Thu Jan 31 07:08:55 2019

  HW: Stackable ICX7150-24-POE
==========================================================================
UNIT 1: SL 1: ICX7150-24P-4X1G POE 24-port Management Module
      Serial  #:FEA3842Q0M7
      Software Package: BASE_SOFT_PACKAGE
      Current License: 4X10GR
      P-ASIC  0: type B160, rev 11  Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-4X10GF 4-port 40G Module
==========================================================================
 1000 MHz ARM processor ARMv7 88 MHz bus
 8192 KB boot flash memory
 2048 MB code flash memory
 1024 MB DRAM
--More--, next page: Space, next line: Return key, quit: Control-c

SEBHSAvigilon(config)#show ver
  Copyright (c) Ruckus Networks, Inc. All rights reserved.
    UNIT 5: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
      (28660224 bytes) from Secondary SPS08090d.bin (UFI)
        SW: Version 08.0.90dT211
      Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz1011             5)
       Compiled on Thu Jan 31 07:08:55 2019
    UNIT 3: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
      (28660224 bytes) from Secondary SPS08090d.bin (UFI)
        SW: Version 08.0.90dT211
      Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz1011             5)
    UNIT 6: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
      (28660224 bytes) from Secondary SPS08090d.bin (UFI)
        SW: Version 08.0.90dT211
      Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz1011             5)

  HW: Stackable ICX7150-24-POE
==========================================================================
UNIT 3: SL 1: ICX7150-24P-4X1G POE 24-port Management Module
      Serial  #:FEA3842Q0LR
      Software Package: BASE_SOFT_PACKAGE
      Current License: 4X10GR
==========================================================================

4 REPLIES 4

BenBeck
Moderator
Moderator

Hey Daniel, 

I would recommend opening a support case on this one so one of our engineers can properly investigate. Can you confirm what code you were upgrading from? If it was something older, you need to use 8080F (non-ufi) as an intermediate hop. 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

I upgraded to 8080f first then up to 8090d ufi

Hey Daniel, 

Thanks. I would definitely recommend opening a support case (see my signature) so we can do some proper analysis. 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

submitted