cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7150-24-4X10GR specification

yee_nok_li
New Contributor II
Dear support,

Could you help to confirm that ICX7150-24-4X10GR can meet the requirement as below. Thanks

1. Shall provide not more than 200ms stack convergence
2. Shall provide link redundancy without enabling any Spanning Tree Protocol
3. Shall have embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
4. Shall support ARP spoofing attack detection/prevention
5. Shall support Storm Control – Unicast, Multicast, Broadcast
6. Shall support Multicast VLAN Registration (MVR)
7. Shall support Multiple authentication mode in 802.1x Host Mode, which allows multiple authenticated clients (multiple dot1x and MAB clients at the same time) connect through the same switch port on the same data VLAN;
8. Shall support 802.1x Single Host Mode, which only allows ONE authenticated client (either authenticated with 802.1x or MAC authentication bypass client) connect through the same switch port on the same data VLAN;
9. Shall support 802.1x Authentication with Inaccessible Authentication Bypass on both 802.1x Single Host and Multiple Authentication ports
10. Shall compatible with existing hardware, Aruba ClearPass Policy Manager etc
11. Shall support operation temperature environments between -5oC to 45oC

2 REPLIES 2

david_chavarri1
Moderator
Moderator
Hi, check all the information here: https://www.commscope.com/product-typ...

Redundancy with LAG
Stack supporred.
Dot1x supported

simon_pollard
Contributor II