RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

Upgarding sz144 controller to 6.1.2

I am trying to upgrade sz144 controller to 6.1.2 from 5.2.2.0.1563, but it starts the upgrading and then comes back to original screen and on version 5.2.2.0.1563What could be the reason for this?

T750 not connecting to Smartzone Controller

Hi all,I have a Ruckus Smartzone Controller. Version 5.1.0 with 189 R750's. I just purchased a T750 for outside. The T750 has an IP address. I can log into the AP. I ran the command for the AP to look to the zone controller. I can ping the zone...

Resolved! Status code: 500 "HV000028: Unexpected exception during isValid call"

Hello! I'm trying to update the passphrase of one of our SSIDs using the API. After I slowly put together the necessary HTTP requests, I now get an error 500 "Unexpected exception during isValid call". Does anyone have an idea which part of the Json ...

Multicast on Zone Director 3050

Hi,I have been trying to get multicast working on our WiFi network. Here is a synopsis of the setup.A zone director 3050 running version 9.13.3.0 build 145. Managing mainly r600 APs with a few other models sprinkled in. There is an WLAN configured wi...

Zonedirector to Smartzone Mesh Migration

Hello Team,Good Day!I have a client with mesh access points about 20 plus access points. the setup is 1 root connected with 3 to 4 mesh AP outdoors. the other is an indoor location 1 root 1 mesh. I seek your advice on what happens if I migrate the me...

CommScope RUCKUS Community Forums

Forum Posts

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

Upgarding sz144 controller to 6.1.2

T750 not connecting to Smartzone Controller

Resolved! Status code: 500 "HV000028: Unexpected exception during isValid call"

Multicast on Zone Director 3050

Zonedirector to Smartzone Mesh Migration

Welcome to RUCKUS Community!

Top Contributor Contest

Related Self-Help

Status code: 500 "HV000028: Unexpected exception d...

Migrating Access Points from SZ100 to vSZ

R500 not joining Virtual Smart Zone

Ruckus ZD

Port Group for SZ-144 Controller

Change the controller name while it is part of Clu...

Change Port Default SSH Tunnel Port on Data and co...

Code 236 Event Client no show on my SZ300 V6

[sz(or vsz)] What settings should I change? Will t...

Venue Code