cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus Switch Power Outage

Monecha7
New Contributor

My connectivity has been on an off with the ruckus switch. I was able to find the IP address of my ruckus switch and access the switch via SSH on my MacBook terminal. When I’m trying to perform the commands, I get the following response below. Is there a way to handle this?

ruckus> enable
ruckus# show version
The command is either unrecognized or incomplete. To view a list of commands that you can run  from this context, type '?' or 'help'.
ruckus# show in line
The command is either unrecognized or incomplete. To view a list of commands that you can run  from this context, type '?' or 'help'.

8 REPLIES 8

Chandini
RUCKUS Team Member

Hi Monacha7

Thank you for reaching out to us. 

Could you please let us know the switch model that you are using ? 

Is it a new installation ? 

Please share out put of below command so that we can help you to isolate the issue . 

  • Ruckus # ? 
  • Ruckus# show ? 

Thanks 

MAC: DC:AE EB:2E 55:10

This is not new installation. 

[Please login: admin

Password:

Welcome to Ruckus Unleashed Network Command Line Interface

Fav ruckus> enable ruckus# show

location-services

ааа

Contains commands that can be executed from within the context.

dhop

Contains commands that can be executed from within the context.

ap

Contains commands that can be executed from within the context.

ap-group

Contains commands that can be executed from within the context.

ap-policy

Contains commands that can be executed from within the context.

Displays the ap policy settings.

config

Displays current system options.

performance

Displays AP or station performance.

sysinfo

Displays current system status.

ethinfo

Displays current system ethernet status.

techsupport

Sma

Displays current system options and status.

mgmt-acl static-route

Contains commands that can be executed from within the context.

On wlan

Contains commands that can be executed from within the context.

Contains commands that can be executed from within the context.

wlan-group

12acl

Contains commands that can be executed from within the context.

whitelist

Contains commands that can be executed from within the context.

13acl

Contains commands that can be executed from within the context.

hotspot

Contains commands that can be executed from within the context.

Contains commands that can be executed from within the context.

Gm guest-access-service

hs20op hs20sp role vlan-pool

Drafts

Contains commands that can be executed from within the context.

Contains commands that can be executed from within the context.

Contains commands that can be executed from within the context.

Contains commands that can be executed from within the context.

Contains commands that can be executed from within the context.