Showing results for 
Search instead for 
Did you mean: 

My rockus switch stoped working after power outage.

New Contributor

I tried to unplug it, tried to recet it, many times non of them worked.i have power and syst lights green. But ports where my smart home conected is  yellow.No power going to ap.



Hi @Dmitry 



Thanks for your response.


If the resetting process doesn't work, we need to perform a software recovery.


Here is the quick guide to perform software recovery.


How to perform a Software recovery on an ICX7150 switch


Ruckus ICX Recovery Load boot code from boot monitor


Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.


1.Upgrade a Switch ICX-7150-C12P using a USB flash drive


2. Upgrade a Switch ICX7150-C12P via TFTP


3. Upgrade a switch via Web GUI (ICX7150 Switch)


Please let us know if you have any queries in this regard.


Best regards,


Lennar Home Community